Victrola Eastwood II Bluetooth Record Player Review

The Victrola Eastwood II Bluetooth Record Player is a compact all-in-one turntable with built-in speakers, Bluetooth input and Bluetooth output. It is aimed at buyers who want to play records with minimal fuss, rather than assemble a separate amplifier, turntable and speaker system.

Its strongest fit is a bedroom, student room, small flat or casual living space where convenience and appearance matter. The Eastwood II, part of Victrola’s VTA-74 family, should also be distinguished from the earlier Eastwood/VTA-72 and the larger Eastwood LP.

This is best viewed as a starter record player with useful connectivity and a better cartridge than many very cheap all-in-one units. It is not designed to replace a proper hi-fi turntable and speaker setup for serious long-term listening.

The Eastwood II uses a compact tabletop form with a vintage-modern look, a fabric front grille and a removable dust cover. Victrola lists MDF and plastic as the main materials, which is typical for an affordable all-in-one player.

Its smaller plinth helps it fit on shelves and desks, but 12-inch LPs overhang the body during playback. That is not unusual for compact record players, though it can feel less reassuring than a full-size turntable when handling records.

Controls are deliberately simple. A single illuminated knob handles power, mode selection and volume, while record playback is managed with the speed selector, cueing lever and auto-stop switch.

The build is convenience-led rather than enthusiast-focused. Available evidence points to attractive styling and easy handling, but also a lightweight feel, non-adjustable tonearm design and some ergonomic compromises around the compact construction.

The key appeal is that the Eastwood II includes the turntable, amplifier and stereo speakers in one unit. You can play records without extra equipment, then use RCA line out later if you want to connect powered speakers or an amplifier with a line-level input.

Victrola fits an Audio-Technica AT-3600LA moving-magnet cartridge, with the manual specifying an ATN3600L replacement stylus. That is a meaningful advantage over many very cheap record players using basic ceramic cartridges, although the surrounding tonearm and platter system remain budget-level.

Bluetooth works in both directions. Bluetooth input lets a phone play through the built-in speakers, while Vinyl Stream mode sends record playback to compatible Bluetooth speakers or headphones.

The player supports 33 1/3, 45 and 78 RPM speeds, and a 45 RPM adaptor is listed as included. It also has a rear 3.5 mm headphone output, auto-stop and a removable dust cover, but no USB recording output is confirmed in the supplied specifications.

Setup is intended to be beginner-friendly. Place the unit on a flat, stable surface, remove the tonearm tie and stylus guard, connect the supplied power adaptor, select the speed and use the cueing lever to lower the stylus.

The main illuminated knob keeps daily use simple by covering power, volume and mode switching. In Vinyl mode, playback can use the built-in speakers, RCA output or headphone output.

Vinyl Stream mode requires pairing with a compatible Bluetooth speaker or headphones, and the internal speakers are disabled in that mode. The supplied notes advise close-range pairing initially and typical use within about 10 metres, so positioning may matter if the connection is unreliable.

Day-to-day operation is designed to be straightforward. Select the mode with the main knob, choose the correct speed, cue the tonearm manually and use auto-stop if you want the platter to stop at the end of a side.

It is not a fully automatic turntable. The user must place and lift the tonearm, so it suits buyers happy with a simple manual routine rather than push-button automatic playback.

Connectivity is flexible for a small all-in-one player. RCA line output is useful for powered speakers or an amplifier, while Vinyl Stream is practical for late-night headphone listening or rooms where speaker cables are inconvenient.

Expectations around mechanical performance should stay realistic. The lightweight construction and non-adjustable tonearm mean it is not the right platform for users who are highly sensitive to speed stability, tracking adjustment or long-term upgrade potential.

The Eastwood II’s Audio-Technica moving-magnet cartridge gives it a more credible starting point than many very basic all-in-one players. Within this category, that should help with clearer record playback than the simplest ceramic-cartridge designs.

The built-in speakers are mainly about convenience. Their compact enclosure means bass depth, stereo spread and high-volume composure are likely to be limited compared with separate powered speakers.

Using the RCA line output into better external speakers should be the most sensible improvement path. Bluetooth output is useful and tidy, but it should be treated as a convenience feature rather than the highest-fidelity way to hear vinyl.

For valuable collections or critical listening, a dedicated turntable with adjustable tracking force, anti-skate and a more substantial platter would be more appropriate. The Eastwood II is better judged as a casual starter player than as a serious hi-fi source.